No need for wheelbarrows, shovels or other hand tools when you roll onto jobsites with the Bobcat® MT100 mini track loader. It goes through gates, doorways and other narrow spaces with ease. The machine also delivers a big boost in power with a 1,000-lb. rated operating capacity, powerful breakout force and impressive lift height. The optimized roller spacing on the MT100’s track system improves ride quality for enhanced operator comfort and confidence when working long days. Easy, tool-free access to maintenance areas and advanced safety features, including neutral start interlocks, are standard on the MT100 mini track loader, while sealed rollers eliminate the need for daily roller maintenance and decrease downtime.
Powered by a dependable, durable Tier 4 diesel engine, this mini track loader uses an efficient hydraulic system to deliver fast cycle times and increased strength when working with big loads. This loader also features high-flotation tracks that allow it to move across wet and muddy ground conditions with less worry about repair time and costs associated with surface damage.
listing does not include Tax, materials and handling or Dealer prep. Listing does not include any attachments or implements installed unless noted. Dealer not responsible for errors. Call for availability.
Bobcat MT100 | |
Engine | |
Emissions Tier (EPA) | Tier 4 |
Engine Model | D902-E4B-BC-1 |
Engine Make | Kubota |
Engine Cooling | Liquid |
Engine Fuel | Diesel |
Displacement | 55 in³ |
Number of Cylinders | 3 |
Horsepower | 24.8 hp |
Performance | |
Rated Operating Capacity (ISO) | 1,000 lb |
ROC (ISO) with Standard Counterweight – Undercarriage Position | n/a |
ROC (ISO) with Standard Counterweight – Rear Upright Position | n/a |
Carry Position ROC with Standard Counterweight -UnderCarriage Position | 1,300 lb |
Carry Position ROC with Standard Counterweight – Rear Upright Position | n/a |
Tipping Load | 2898 lb |
Operating Weight | 3390 lb |
Ground Pressure (Rubber) | 5.25 psi |
Travel Speed | 4.1 mph |
Travel Speed – Reverse | 2.9 mph |
Capacities | |
Fuel Tank | 7 gal |
Hydraulic System | |
Pump Capacity | 12 gal/min |
System Relief @ Quick Couplers | 2,900 psi |
Auxiliary Std Flow | 12 gal/min |
General | |
Contract Codes | Mini-Track Loader |
First Year of Production | 2020 |
Controls | |
Vehicle Steering | Other |
Lift and Tilt | Controlled by joystick |
Auxiliary Hydraulics Type | Controlled by fore and aft movement of hand lever |
Dimension | |
Length | 106.2 in |
Width | 35.6 in |
Height | 54.6 in |
Height to Bucket Hinge Pin | 80.9 in |
Length of track on ground | 41.4 in |
Length without Attachment | 84.5 in |
Length with Standard Bucket | 106.2 in |
Width (with bucket) | 3 ft |
Reach @ Maximum Height | 18.6 in |
Dump Angle @ Maximum Height | 48.7° |
Ground Clearance | 8 in |
Angle of Departure | 23.8° |
Features | |
Lift-Arm Support | ■ |
Auxiliary Hydraulics | ■ |
Spark Arrestor Muffler | ■ |
Bob-Tach Attachment System * | ■ |
Reverse Travel Stop Panel | □ |
Wide Track | ☑ |
Neutral Start Interlocks | ■ |
Lift Arm Lockout With Manual Bypass | ■ |
Tilt Lockout | ■ |
Built-In Tie Down & Crane/Lift Locations | ■ |
Ride-on Platform | ■ |
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors. |